news

Home / news / Wear plate application unit field

Wear plate application unit field
Release time:2020-11-19

In reality we will see a lot of wear plates, but wear plate application unit field? Let's take a closer look.

1) Thermal power plant: medium speed coal mill barrel liner, fan impeller shell, dust collector inlet flue, ash tube, bucket turbine liner, separator connection pipe, coal crusher liner, coal scuttle and crusher liner, burner burner, coal scuttle and funnel liner, air preloader support shingle, separator guide blade. The above parts do not have too high requirements on the hardness and wear resistance of the wear-resistant steel plate, you can use the raw material for nM360/400 thickness of 6-10mm wear-resistant steel plate.

2) Coal yard: feed trough and funnel lining, hopper liner, fan blade, bottom plate of pusher, cyclone dust collector, coke guide liner, ball mill lining, bit stabilizer, screw feeder bell and base plate, bucket lining of kneading machine, ring feeder and bottom plate of dump truck. The operation environment of coal yard is harsh, so it has certain requirements on the corrosion resistance and wear resistance strength of wear-resisting steel plate. It is recommended to use the wear-resisting steel plate with the thickness of 8-26mm made of NM400/450 HARDOX400.

3) Cement plant: chute liner, end bushing, cyclone dust collector, powder separator blade and guide blade, fan blade and liner, recovery bucket liner, screw conveyor bottom plate, pipe assembly, frit cooling plate liner, conveyor trough liner. These components also require wear resistant steel plates with better wear resistance and corrosion resistance. Wear resistant steel plates with a thickness of 8-30mMD can be made from nM360/400 HARDOX400.

4) Loading machinery: strip mill chain plate, hopper lining plate, grab blade plate, automatic tipping truck hopper plate, dump truck body. This requires wear resistance strength and hardness of wear resistant steel plate, it is recommended to use the raw material for NM500 HarDOx 450/500 thickness of 25-45mm wear resistant steel plate.

5) Mining machinery: ore materials, stone crusher lining board, blade, conveyor lining board, baffle. Wear resistance of such components, available in nM450/500 HarDOx 450/500 thickness between 10-30mm wear-resistant steel plate.

6) Construction machinery: tooth board of cement pusher, concrete mixing building, lining board of mixer, lining board of dust catcher, mould board of brick-making machine. The recommended material is nM360/400 wear resistant steel plate with a thickness of 10-30mm.

7) Construction machinery: loader, bulldozer, excavator bucket plate, side blade plate, bucket bottom plate, blade, rotary digging drill pipe. This kind of machine needs the wear-resistant steel plate of especially strong and wear-resistant strength, available raw material is NM500 Hardox 500/550/600 thickness in 20-60mm high strength wear-resistant steel plate.

8) Metallurgical machinery: iron ore sintering machine, transport elbow, iron ore sintering machine lining board, scraping machine lining board. Because this kind of machinery needs high temperature resistance, hardness, wear - resistant steel. Therefore, HARDOX600HARDOXHiTuf series wear resistant steel plate is introduced.

9) Wear-resistant steel plate can also be used in sanding machine barrel, blade, all kinds of freight yard, wharf machinery parts, bearing structure, railway wheel structure, roll, etc.


Online message

Copyright 2020 Wanzhi Steel. All Rights Reserved.

Contact Us